|
Post by Joshua "Tire Destroyer" Mertz on Oct 3, 2015 18:19:26 GMT -5
Everything cleared out(except for one of my dogs) and ready for Obutto assembly.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 3, 2015 19:44:36 GMT -5
Can't wait to see it built!
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 3, 2015 19:47:14 GMT -5
LOL
|
|
|
Post by Jason "Curby" Roy on Oct 3, 2015 20:19:26 GMT -5
Looks like the same fun I'd have building a BBQ! Good luck Joshua, looking forward to the final product.
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 3, 2015 20:39:06 GMT -5
I've spent the last hour just taking all the bubble wrap off everything.
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 3, 2015 20:50:22 GMT -5
Damn it! I unbox the triple monitor mount and it dawns on me I don't have any vesa mount screws. Off to Lowe's I go before they close.
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 3, 2015 21:50:37 GMT -5
Lowe's run accomplished...back to work.
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 4, 2015 0:07:04 GMT -5
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 4, 2015 1:40:57 GMT -5
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 4, 2015 1:57:30 GMT -5
Pain in the ass mounting those side screens by myself
|
|
|
Post by Jake Fox on Oct 4, 2015 1:57:44 GMT -5
Just about ready to go. Looks good with the triple mount.
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 4, 2015 2:07:21 GMT -5
Now comes the fun part...hooking everything up to the pc.
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 4, 2015 3:36:52 GMT -5
And done
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 4, 2015 5:59:00 GMT -5
Nice work! Comfortable?
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 5, 2015 0:58:23 GMT -5
Lot more comfortable than my old setup. Some more fine tuning is needed on placement of certain things. Waiting for tbe mount to come in so I can mount the 4th monitor above the center one. Need to sit a table on the right side for easier access to my mouse and to have somewhere to sit the keyboard and mouse for the stream pc.
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 6, 2015 10:01:52 GMT -5
Mount for my 4th monitor that I use for the stream pc should be here tomorrow so I can get that monitor off the floor and sit a small table next to me so I can have easier access to my mouse during races. Also ordered some better parts for the stream pc so it'll be more reliable.
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 8, 2015 19:17:02 GMT -5
|
|
|
Post by Joshua "Tire Destroyer" Mertz on Oct 13, 2015 0:52:00 GMT -5
I need to upgrade my shifter. I've blown two engine missing shifts when I'm off just a fraction of an inch shifting from 2nd to 3rd. I even hit the wall next to 3rd on the wrong side it registers 1st and boom goes my engine.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 13, 2015 6:20:44 GMT -5
Yeah, I've been considering the fanatec Sq thingy but it's on backorder I guess. I'm very impatient but I might be stuck because the only other thing in its league is frex which is quite a bit more $¥$
|
|
|
Post by Stephan Spantig on Oct 13, 2015 7:36:12 GMT -5
Joshua "Tire Destroyer" Mertz: A lot of people swear on the Thrustmaster shifter. If I'd be in need of a shifter, I'd probably have a closer look on this.
|
|