|
Post by Joe "Ironlung" Kirsch on Apr 29, 2016 7:49:27 GMT -5
Hi guys, I'm desperately looking for a mobile phone holder for my CSW V2. My idea would be to mount it onto the two threads, which are the unused ones in front of the base (for any reason, I can't upload a picture). Has anyone of you got an idea and/or does anyone know, where I could get such a holder from? Cheers
|
|
|
Post by Sai "We're Outta Fuel" Andra on May 1, 2016 20:55:23 GMT -5
Honestly I think just getting a suction mount and slapping it on there is an easier solution, since you'll most likely have to drill your own mount to use for the holder.
|
|
|
Post by Mattias Magnusson on May 2, 2016 12:06:56 GMT -5
I bought a plastic case for my nexus 7, dose thin ones. Then I cut out a plastic pice from another old tablet case I had left over and trimmed it to fit with the two holes on the top of the Base. Glued the two pieces together and used 2 screws to keep it in place. It's a bad description but I could show some pics ones I get home.
|
|
|
Post by Stephan Spantig on May 2, 2016 12:23:33 GMT -5
RAM mounts seemed to me like an option when searching for something similar. But costs a bit though, ~40 bucks.
|
|
|
Post by Bryan "x4 contact " de Bruyn on May 2, 2016 22:48:55 GMT -5
Though those ram mounts makes for a perfect fit and will last forever. Got a few of those for mounting my DSD buttonboxes and other gizmo's , like 7"inch tab and iFlag enclosure. You won't regret it and because of it's modular design, buy some other parts and something else will fit nicely onto your rig.
But some nice handywork by your own hands will be more satisfactory, it's your choice
|
|
|
Post by Alessandro Longoni on May 3, 2016 7:54:08 GMT -5
|
|